VR Headset & Charging
  • Sign in

    • VR Headset & Charging

    Important: All components of FLAIM WSF should be recharged prior to each use.

    1. Remove the headset charger from the case.
    2. Plug the charger cable into the VR Headset.
    3. Plug the headset charger into a power outlet.

    4. The flashing battery LED indicates the charging level.  It is fully charged when 4 battery LED's are illuminated.


    5. The VR headset battery should last approximately 2 hours and charge within 1 hour.

    Important: The VR Headset battery can be charged when attached or not attached to the headset. 


    Headset Controls

    Power Button: Press and hold to turn the VR Headset on/off. When powered on, a short press will put the display to sleep, another one will activate the display and reset the floor/height calibration.


    Headset volume controls: Press either end to adjust the volume louder or softer.

    Lens adjustment dial: Scroll the wheel to adjust the lens spacing for a better viewing experience.

    Headset side button: Press and hold button to return to lobby. Double-press to switch to pass-through mode which enables visibility of real world.